Nails Supplier | Roofing & Common Nail Products

What should buyers confirm before sourcing nails?

Nails quotation should start with nail type, length, shank diameter or gauge, head style, shank style, surface finish, packing mode, total quantity, destination port and document needs. ANJIA supplies common round wire nails, concrete nails, roofing nails, U type staples and custom special nails for construction, carpentry, roofing, hardware distribution and mixed small-hardware export orders.

Product Overview

ANJIA supplies nails for importers, hardware distributors, construction buyers and mixed container orders that require clear nail type, length, shank gauge, surface finish and packing control. The existing specification table confirms the main quotation range: common round wire nails, concrete nails, roofing nails, U type staples and custom special nails; 16mm-150mm length; 8G-18G or 1.2mm-4.8mm shank diameter; flat or round head; smooth, ring or twisted shank; bright polished, electro galvanized, hot dip galvanized or black coated finish; and bulk carton, small plastic bag, bucket, woven bag or pallet loading.

For sourcing, buyers should separate product type from packing route. A common nail order, roofing nail order, concrete nail order and U type staple order may require different head style, shank grip, coating level, carton weight, retail bag, bucket or pallet plan. Confirming these details together helps ANJIA prepare a comparable quotation, packing list and pre-shipment proof package.

Specifications

Specification	Common options	Quotation note
Nail type	Common round wire nails, concrete nails, roofing nails, U type staples, custom special nails	Confirm application scenario and supply drawing for special custom nails.
Length	Measured in inch or mm, range from 16mm to 150mm	Exact length is mandatory for accurate quotation.
Shank diameter & gauge	Standard wire gauge 8G–18G; diameter 1.2mm–4.8mm	Shank diameter must be matched with nail length for load requirement.
Head & shank style	Flat head, round head; smooth shank, ring shank, twisted shank	Different structures fit wood, concrete and roof installation separately.
Surface treatment	Bright polished, electro galvanized, hot dip galvanized, black coated	Select finish based on local climate anti-corrosion demand.
Packing mode	Bulk carton, small plastic bag, bucket, woven bag, pallet loading	Confirm target market retail or wholesale packing standard.

How to Specify Nails for RFQ

To specify nails for RFQ, send nail type, length in mm or inch, shank diameter or gauge, head style, shank style, surface finish, packing mode, carton weight, bag or bucket requirement, private label need, total quantity, destination port, trade terms and document scope. If the order is based on a market sample, attach photos or a drawing showing length, head diameter, shank pattern and packing label where available.

Nails, cut wire and small wire hardware should be separated by product type, material, length, shank diameter, head type, shank route, surface treatment, package weight and carton label. Nails are reviewed for construction, hardware, pallet, carpentry or distributor stock orders where SKU mix and packing control matter; cut wire is quoted by wire diameter and cut length instead. Buyers should confirm nail type, length, diameter, head, shank, finish, package weight, pieces or weight per carton, label, pallet plan, mixed container scope and destination before quotation.

Typical RFQ details

Product specification

Nail type: common round wire nail, concrete nail, roofing nail, U type staple or custom special nail
Shank diameter or gauge: confirm 8G-18G or mm diameter where possible
Head style: flat head, round head, roofing head or buyer-defined head style
Shank style: smooth shank, ring shank, twisted shank or staple leg form

Finish and application

Length: confirm inch or millimeter basis and exact finished length
Surface finish: bright polished, electro galvanized, hot dip galvanized, black coated or custom finish

Order and document scope

Packing mode: bulk carton, small plastic bag, bucket, woven bag, pallet or retail pack
Carton and label details: carton weight, item code, barcode, private label or shipping mark
Quantity scope: total weight, carton count, size mix, trial order or full pallet order
Destination and trade scope: destination port, trade terms and delivery batch
Document scope: certificates, inspection photos, technical data sheet and export documents

Send Requirement

Product Formats / Options

Format / option	Best for	Buyer notes
Common round wire nails	General construction and wood fastening route	Confirm length, shank diameter, head style and carton weight.
Concrete nails	Harder fastening route for concrete or masonry use	Confirm material hardness, length, shank style and finish.
Roofing nails	Roofing and sheet fixing route with larger head or washer-style demand	Confirm head type, length, finish and bag/carton packing.
U type staples	U-shaped fastening route for wire, mesh, fence or turf fixing	Confirm leg length, wire diameter, crown width and packing count.
Ring or twisted shank nails	Higher grip route for selected construction or pallet uses	Confirm shank type, head style, length and target material.
Custom special nails	Buyer-defined route for drawings, samples or private-label hardware lines	Confirm drawing, tolerance, material, finish and packing.
Construction nails vs mixed small wire hardware	Buyers comparing nail SKUs with cut wire, binding wire or other small wire products in distributor orders	Confirm nail type, length, diameter, head, shank, finish, package weight, carton label, SKU mix and destination.

Material and Surface Finish Options

Option	When buyers discuss it	RFQ notes
Bright polished	Basic smooth surface route for indoor or general dry applications	Confirm storage and rust-prevention expectation.
Electro galvanized	Bright zinc-coated route for general hardware and light corrosion protection	Confirm zinc expectation and target market use.
Hot dip galvanized	Heavier zinc-coated route for stronger corrosion protection	Confirm coating requirement, appearance and packing method.
Black coated	Dark coated route for selected construction or market-specific demand	Confirm coating appearance and storage condition.
Custom color or special finish	Special route for roofing nails, private-label hardware or buyer sample matching	Confirm sample, color and finish acceptance basis.
Packing-controlled finish selection	Finish and packing should be reviewed together for humidity, carton weight and warehouse handling	Confirm destination and storage environment.
Surface treatment, carton mark and SKU label review	Nail orders where galvanized, black, polished or other finish and carton labels affect receiving checks	Confirm finish, package weight, pieces or weight per carton, carton mark, SKU label, pallet plan and destination.

Applications and Packing

Applications

Building construction & carpentry fastening
Hardware store distributor bulk supply
Wood packaging & pallet fixing
Roof waterproof layer fixing
Concrete wall masonry installation
Furniture manufacturing assembly
Retail supermarket hardware retail
Municipal engineering fastening projects

Packing

Standard bulk export carton packing
Small plastic bag inner + outer carton
Plastic bucket weight packing
Woven sack bulk loose packing
Wooden pallet consolidated loading
Custom printed private label cartons
Mixed specification mixed carton packing

Nails can be packed in bulk cartons, small plastic bags, buckets, woven bags, retail packs or palletized export loads according to nail type, size, coating, carton weight, label requirement and target market. For distributor orders, ANJIA can review bag count, carton mark, item code, mixed nail types, pallet layout and loading documents before shipment.

Project-Level Delivery and Documentation Support

ANJIA can support nails orders as a project-level delivery package including official quotation, technical data sheet, nail size schedule, surface finish route, packing plan, label confirmation, sample support, ISO 9001, ISO 14001, CE, RoHS and company qualification references, inspection photos and export shipping documents after order details are confirmed.

Document or support item	Buyer value	Availability note
Official Quotation	Confirms nail type, length, shank diameter, finish, packing, quantity and trade terms	Prepared after RFQ details are confirmed.
Technical Data Sheet	Helps buyers review nail type, size, head style, shank style, finish and packing	Recommended for importer and distributor review.
Nail Size Schedule	Summarizes common nails, concrete nails, roofing nails, staples or custom items by size	Useful for mixed-size or mixed-type orders.
Packing and Label Confirmation	Confirms carton weight, bag count, bucket, woven bag, pallet and private label scope	Recommended before retail or distributor packing.
ISO 9001, ISO 14001, CE, RoHS and Company Qualification References	Supports buyer qualification and procurement review where applicable	Provided according to available company and product document scope after buyer request.
Sample or Drawing Review	Supports special nail shape, shank style, head style or sample-matching order	Recommended for custom nails and private-label hardware lines.
QA/QC Photos and Inspection Statement	Helps buyers review type, size, finish, packing and labels before shipment	Can be arranged when inspection requirements are discussed before shipment.
Packing List, Commercial Invoice and Certificate of Origin	Supports shipment and import document preparation	Prepared according to confirmed order and shipping requirements.

Document availability depends on confirmed specifications, material route, order requirements and requested standards. Please share certificate or compliance requirements during RFQ review.